Precooling an acetabular liner makes its insertion into a metal shell easier

Richard F. Kyle*, Craig A. Bourgeault, William D. Lew, Joan E. Bechtold

*Corresponding author for this work

Research output: Contribution to journalArticlepeer-review

2 Scopus citations


Temporary shrinkage of an acetabular polyethylene liner due to precooling could reduce the force required to snap the liner into its metal shell. This study documented cooling and heating rates of liners with a particular locking mechanism design, determined forces required to seat liners in their shells as a function of temperature, and quantified the force surgeons can exert with their thumbs when seating a liner. It took up to 8 minutes to cool 58- and 70-mm liners in an ice-water bath from room temperature to near 0°C, and up to 24 minutes to subsequently warm these liners to near body temperature. Forces required to seat liners were greater at room and body temperatures than at 0°C. Liners precooled to 0°C required insertion forces that could be generated manually by surgeons.

Original languageEnglish
Pages (from-to)249-254
Number of pages6
JournalJournal of Arthroplasty
Issue number2
StatePublished - Feb 2006
Externally publishedYes


  • Acetabular component
  • Metal shell
  • Polyethylene liner
  • Total hip arthroplasty
  • Ultrahigh-molecular-weight polyethylene


Dive into the research topics of 'Precooling an acetabular liner makes its insertion into a metal shell easier'. Together they form a unique fingerprint.

Cite this